Streetscape Wall Mount Mailbox Installation Instructions

Each wall mount mailbox has two holes positioned at the top corners of the inside back of the mailbox. Two 1 1/4" stainless screws with 1" #10 plastic screw anchors and washers are provided with each mailbox.

1) Position mailbox in desired location and mark wall through the mounting holes.
2) Drill both holes in wall 1" deep using 1/4" drill bit.
3) Insert plastic screw anchors into holes.
4) Insert screws into washers.
4) Align mailbox to anchors in wall, insert screws and tighten.