Streetscape Mailbox Installation Instructions

METHOD 1 - using prefabricated base. (Installation bases are not required for mailbox pole installation and are designed to be fabricated in advance of these instructions)

• STEP #1   
  Mark pole center location 20” behind curb face
  (Mailbox door will be 9 1/2 to 11” behind curb face)
  (Confirm distance with postal carrier)
  
• STEP #2
  Dig hole (Refer to drawing)
  (Use installation base to mark ground)
  
• STEP #3
  Insert installation base in hole
  confirm base is level, 1” above surface
  Remove installation base
  
• STEP #4
  Mix concrete/sand/water
  Fill hole with concrete to 1 1/2 “ from top
  
• STEP #5
  Insert installation base in hole
  Confirm anchor bolts are parallel with curb
  (Allow concrete to set)
  
• STEP #6
  Mount mailbox pole to base using back access door
  (Mailbox to left, parallel with curb)
  
• STEP #7
  Mount custom address sign (if applicable)
  Mount Mailbox

METHOD 2 - Using quickcrete.