Solar
Wall Mount Installation Instructions
-
Mark
location for the mounting holes on the wall surface for the
installation of the Illuminator frame. Drill and install screw
anchors (supplied).
-
-
Discreet
(hide) the low voltage wire to the Illuminator and connect Red
wire to the + (R) and white (W) to marked terminal posts. The
power supply is very low voltage so it’s not dangerous
electrically, just keep it from becoming a trip hazard or getting
caught in lawn & garden equipment.
-
Assemble
ceramic tile in proper order in the fiberboard insert (supplied).
-
Place
the complete fiberboard assembly in the Illuminator frame. Take
care not to let the fiberboard assembly drop from the frame
during assembly. The ceramic tile will break. A little tape
goes a long way.
-
Secure
Illuminator frame to mounting surface with the two (supplied).
Solar
Yard Post Mount Installation Instructions
-
-
Assemble
ceramic tile in proper order in the fiberboard insert (supplied).
-
Place
the complete fiberboard assembly in the Illuminator frame. Take
care not to let the fiberboard assembly drop from the frame
during assembly. The ceramic tile will break. A little tape
goes a long way.
-