This "Brick Look-a-like" mailbox post is manufactured out of high density expanded polystyrene and coated with Styrocrete for long life.

Available in two color combinations: red brick with ivory grout or sandstone/taupe brick and ivory grout. Other colors considered for an slight additional cost - please call. (See Behr Brand Semi-Transparent Concrete Stains for the possibilities).

Please allow 2-4 weeks for delivery via motor freight (semi truck). Shipping weight is approximately 35 pounds for the post and 14 pounds for the mailbox.

Dimensions: Base is 24" x 24"  and is 54" tall overall. 42" approx. height from incoming mail slot to the ground. Warranty: 1 year on the workmanship of the post, 1 year on the mailbox.

This mailbox comes complete with a ten inch aluminum mail storage can and lockable front access door. Other mailboxes may also be substituted, see the selection here. Available in all colors and with the optional High Security option. The Standard Mail slot (10"W x 2-7/8"T) is large enough to accommodate small packages and bundles of mail.

May also be kept unlocked - door will stay closed with the magnetic catch.

The top door, for the incoming mail, opens like an oven door, with hinges on the bottom. The bottom door opens similar to a refrigerator door, with the hinge on the right side.

Front Face Measures 13-1/8" High X 14-7/8"Wide. It's 1" deep.Outgoing Flag not available on this model.

The Aluminum "Can" (the part that holds the mail) is 11-3/8" High X 13-1/8" Wide. It is 10" deep and can be made larger with sheet metal by your installer.

Other mailboxes may also be substituted, see the selection here.

SIMPLE Post Installation: Either slip over your existing 4x4 or dig a new hole and plant a new 4x4 that is about 22" tall. Apply construction cement or any other outdoor - weather proof glue or epoxy over the 4x4. Set the New Orbit over and you are done! Comes with excellent installation instructions. Needs to be installed on a level surface. Base is 24" x 24" and is approximately 54" tall overall. 42" approx. height from incoming mail slot to the ground.

NO returns, NO exchanges on this unit unless damaged in shipping or defective. In that case a replacement will be sent.

Need more than one? Call for discounted pricing. This is a "Mahvelous" Mailboxes & MORE! exclusive - so it is available at wholesale for approved clients.

Optional Accessories:

The High Security option restricts an unwanted hand from entering the box. This option can not be added later, must be ordered from the manufacturer when purchasing the mailbox but it may be removed at a later time, if desired. This option makes it so the opening is 1-1/4"T X 10"W.

Doors Available in 4 Different Colors
This mailbox is accented with solid brass doors which are hand finished. Choices are the Standard Polished Brass finish at no additional charge OR a weathered bronze antique Verdigris patina, OR a Satin Nickel OR an Antique Brass. These doors will not tarnish over time, instead they will continue to weather into a beautiful natural patina. These accents are available in with all stock colors and are excellent for coastal communities.

Brass mailbox flag for brick mailboxes. $69 + FREE S&H

Red mailbox flag for brick mailboxes. $49 + FREE S&H

Mailbox Flag for Brick Mailboxes Installation Instructions To mount on brick or stone, MAKE SURE that you place the flag low enough to the ground and close enough to the front of the column or pillar that the mail carrier can reach if from their vehicle. See to it that you have at least 9 inches of space above where you intend to place the flag so it can pivot freely up and down. Using a masonry drill bit ¼” in diameter, simply drill 2 holes exactly ¾” apart, one directly above the other. Completely tap in the blue anchors. Place the stainless steel screw through the stainless washer, through the flag, through the nylon bushing (small, taper side up) and into the blue plastic anchor. Do that again with the second screw. Tighten until snug.